Modified Citroen AX 1995 Pictures
Comments
very nice
dedo | 28 September 2011 |
Thanks for your comments keep them coming!
Chachieuk, if you still have the manual for the car the loom diagram is in the back, However I shunned the AX`s wiring loom in favor of my own as citroens wiring is a bit pants!
curty_tee yep it is as simple as that just a bit of smoke spray for the rear lights, but make sure you spray evenly and not too thick, otherwise youll be instantly pulled by the police!
Alex the Owner! | 15 July 2010 |
one of the nicest ax`s ive ever seen m8 fair play how did you get smoked rear lights? my chuson said you can get some like spray smoke for rear lights is that what you used?
curty_tee | 30 June 2010 |
cool car and would love mine to look so hot and was just looking for a wiring radio loom diagram any ideas
chachieuk | 16 June 2010 |
it depends on how fast you want it? you can fit a 1.4 ax gt engine with relatively little fuss, the wiring loom is the same engine mounts are all the same, easy! you`ll find a 16v Saxo VTS engine will just cram in the bay with encouragement! but it a lot harder, wiring loom is completely different, you`ll have to uprate your Drive shafts, suspension, new cooling system get more efficient breaks, which means you need new hubs too. another option could be a Peugeot engine from the 106 GTI which is based on the same chassis.
Alex the Owner! | 19 April 2010 |
can any1 help i would like to know engine will fit into my citroen ax as i want to doit up
bren | 12 April 2010 |
where did you get the body kit?
gay boy cole | 17 March 2010 |
Good luck, its a job getting that bonnet into that shape, it took me a good few days of welding before i was happy with the proportions!
As for the Checker-plate for the flooring i used diamondplatestore.com they can bend the creases for you if you give them the measurements, but i did it myself.
Alex the Owner! | 09 January 2010 |
ok. cheers for that iam goin 2 try n make my at the weekend. another question. were did u get the flooring from. ive put red carpet in myn bt with me being a mechanic and gettin in it with me dirty boots its wrecked it lol.
michael | 06 January 2010 |
hi Michael, you cat buy this bonnet from the rack, as with a lot of the bodywork I fabricated it myself, so its a total one off!
Alex the Owner! | 13 November 2009 |
Nice Now How much did it cost to do all that coz i got an ax and it looks like a pile of crap and urs looks great
Adam Bate | 12 November 2009 |
nice ax i had a black gt which i stunted n as 4 the wheels i got the same set from the breakers off a saxo for a ton
bankszie | 07 November 2009 |
hi just woundering were about did u get your bonnet ive looked every were 4 1 n cant find 1
michael | 19 October 2009 |
i love the ice
jonathan | 01 June 2009 |
nice car I love axs
jonathan | 01 June 2009 |
jeez you did a f*kin fantastic job
amy-jayne | 27 May 2009 |
Hey Tom, thanks, it depends on how fast you really want it? you can fit a 1.4 l ax gt engine with relatively little fuss, the wiring loom is the same engine mounts are all the same, easy! you might be surprised to find that a Saxo VTS engine will just cram in the bay with encouragement! but it a lot harder, wiring loom is completely different, you`ll have to uprate your Drive shafts, suspension, new cooling system get more efficient breaks, which means you need new hubs too. another option could be a Peugeot engine from the 106 GTI which is based on the same chassis.
Hope I help!
Alex The Owner! | 06 May 2009 |
Hey Alex great car, was wondering about any suggestions to modify my ax, its stock at the moment and took it on as a project, was wondering especially what engine to drop in instead of standard 1.0l
Tom Ax | 05 May 2009 |
you wont find another bonnet like this one, I modified myself as far as I know its the only one around !!!
Alex The Owner! | 01 May 2009 |
where did you get the bonnet from? cant fond 1 anywhere??!! great car btw!
r | 18 April 2009 |
gooooooooooooooood car
hassan shawky | 22 March 2009 |
I spent £2500 in total including the car, I got the kit off the internet, it pretty standard, although I had to heavily modify it to fit!!
Alex The Owner! | 10 March 2009 |
iv got those wheels! i was lucky to find them at a scrap yard :-p
lynsey | 02 March 2009 |
Looking sicko !!..just wondering where did you get your body kit from?
Josh | 01 March 2009 |
Love the bonnet mate. How much did u roughly spend on modding it car?
Alan | 28 February 2009 |
Hi, i had real trouble getting wheels for it, in the end i had to opt for team dynamics 14" motorsports, you can get some from
http://www.alloywheels.com/product.asp?P_ID=883
I know your probably looking for something bigger, but without extensive work you wont fit anything bigger than a 16" and im not to sure if they do a 16" in a 3 stud fitment, I chose the 14" because with the small gear box these have the smaller wheels get you accelerating faster and the tires are cheap so a day at Santa Pod Isn`t gunna kill your wallet!!
Alex The Owner! | 24 February 2009 |
hi m8 ive got a ax for my 1st car n bin lukin 4 wheels 4 it but cant find nice ones, where did u get urs?
hugh jass | 18 February 2009 |
hi just brought an citroen ax 1.4 gt its the ex citroen show car. perlecent paint with white perlecents alloys. powerflow exhaist gull body kit, cobera bucket seats with harneses, really fast.
james g | 11 February 2009 |
This is fantastic i have a citroen AX myself but this one is cool!!!
John Pickering | 10 November 2008 |
Nice rings friends, that have 3 orifices?, Can to indicate me, where to buy thats!
Littman | 30 September 2008 |
Hey, this was my first attempt at modding a car it took me 14 months to build but i did everything on this little pocket rocket!! let me know what you think!
Alex - The Owner! | 31 August 2008 |
OMG i had a litre ax blew it up twice lol
Ria | 24 August 2008 |
put some nos in m8 mint car tho
chikencustard | 20 August 2008 |
hi there
i just got a 954 cc AX for my first car i know its not much but oh well lol
i was just wondering where you got the head unit to fit where the onld radio fit as i cannot see where i could get the addaptor
Dan | 21 July 2008 |
i think the outside of the car looks good but the interior could be better but i would like to see this car again but better
chris king | 09 June 2008 |
View this page on our mobile site
Links:
